Archive for August 2017

The range of Brass Fittings at Direct Wholesale Supplies

Direct Wholesale  Supplies provides a range of brass fittings  primarily used in pressurized piping systems, though there is some overlap with fittings for low-pressure or non-pressurized systems.
An elbow is installed between two lengths of pipe  to allow a change of direction, usually a 90° or 45° angle; 22.5° elbows are also available. The ends may be machined for butt welding, threaded or socketed. When the ends differ in size, it is known as a reducing elbow.

 

A 90º elbow, also known as a “90 b bend” attaches readily to plastic, copper, cast iron, steel, and lead, and is attached to rubber with stainless-steel clamps. Other available materials include silicone, rubber compounds, galvanized steel, and nylon. It is primarily used to connect hoses to valves, water pumps and deck drains. A 45º elbow, also known as a “45 bend”  is commonly used in water-supply facilities, food, chemical and electronic industrial pipeline networks, air-conditioning pipelines, agriculture and garden production, and solar-energy facility piping.

 

Elbows are also categorized by length.  Short elbows, widely available, are typically used in pressurized systems, and in physically tight locations.
Long elbows are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.

 

A coupling connects two pipes. If their sizes differ, the fitting is known as a adapter. There are two types of couplings: “regular” and “slip”. A regular coupling has a small ridge or stop internally, to prevent over-insertion of a pipe, and thus under-insertion of the pipe.  A coupling is deliberately made without this internal stop, to allow it to be slipped into place in tight locations, such as the repair of a pipe that has a small leak due to corrosion or freeze bursting, or which had to be cut temporarily for some reason.. Since the alignment stop is missing, it is up to the installer to carefully measure the final location of the slip coupling to ensure that it is located correctly.
A union, similar to a coupling, allows the convenient future disconnection of pipes for maintenance or fixture replacement. In contrast to a coupling requiring solvent welding, or rotation , a union allows easy connection and disconnection, multiple times if needed. It consists of three parts: a nut, a female end and a male end. When the female and male ends are joined, the nut seals the joint by pressing the two ends tightly together. Unions are a type of very compact flange connector.

 

Union with  insulation, separate dissimilar metals (such as copper and galvanized steel) to prevent  corrosion. When two dissimilar metals are in contact with an electrically conductive solution., they form an  couple which generates a voltage by electrolysis. When the metals are in direct contact with each other, the electric current from one to the other also moves metallic ions from one to the other; this dissolves one metal, depositing it on the other. A dielectric union breaks the electrical path with a plastic liner between its halves, limiting galvanic corrosion.

 

A nipple is a short stub of pipe, usually  steel, brass, or copper which connects two other fittings. A nipple with continuous uninterrupted threading is known as a closenipple. Nipples are commonly used with plumbing and hoses.
A tee, the most common pipe fitting, is used to combine fluid flow. It is available with female thread sockets, solvent-weld sockets or opposed solvent-weld sockets and a female-threaded side outlet. Tees can connect pipes of different diameters or change the direction of a pipe run, or both. Available in a variety of materials, sizes and finishes, they may also be used to transport two-fluid mixtures.] Tees may be equal or unequal in size of their three connections, with equal tees the most common.
Looking  for brass fittings? Order at Direct Wholesale Supplies now.

Cabinet Levelers with EZ-LEVEL

EZ LEVEL is an industry-leading business in the home improvement market. The entity is based in South West Florida, and was founded in 2009. Every item the company makes is established and manufactured in the U.S. from the highest grade of materials offered. The EZ-Level leveling system was developed by Brooks Courtney, an experienced house improvement professional with many years of experience under his toolbelt. The innovative EZ-Level cabinet leveling system has actually changed the home enhancement industry, using amazing performance and ease of use. Development is the key to success for the business, and it continues to develop new items at a quick speed.

 

The job of hanging kitchen area and bathroom cabinets presents a series of obstacles to homeowners and specialists alike. Initially, walls and floors in the common house are not level. As the home is built, small warping of flooring joists, wall studs, and drywall can develop “from plumb” circumstances. The floors and walls may appear straight, however as cabinets are set up, it becomes clear that a solution is required to level them. Second, level cabinets are crucial for subsequent cooking area equipment installations. Cabinets that are not level can lead to harmed countertops by placing stresses on the materials utilized in counter top building and construction. This is particularly important for counters made from natural or engineered stone.

 

In traditional hanging and leveling methods, each cabinet should be dealt with as a specific element. The first approach developed for leveling cabinets is the shim, a wedge-shaped strip of wood or plastic. Shims are stacked under the base of and behind each cabinet to neutralize the irregular walls and floors. This is a laborious process, and it has its share of issues. Shims can slip out of location or warp due to modifications in temperature level and humidity. When that happens, the cabinets are no longer level. Gradually, this can cause pricey countertop surfaces to break.

 

Next, leg leveling systems were developed. Leg levelers are positioned under the cabinet bodies on floor-mounted cabinets. Leg levelers utilize threaded modifications, and these tend to lack accuracy. Leg levelers streamlined setup to a degree, however not do anything to combat the warping of wall surface areas. Contractors often have to turn to shims to obtain cabinets in line with one another.

 

When EZ-Level presented its ingenious cabinet leveling system, it transformed the industry over night. This system uses a class one lever, here represented as webcams on the body of the leveler itself. They are changed utilizing a threaded adjusting rod. The adjusting rods offer extraordinary accuracy, rendering the cabinets perfectly level and ready to receive counter top surface areas. Cabinet installers can now deal with cabinets as a single system rather than needing to hang and level each element independently. The cabinets are installed to one another, and the EZ-Leveling system makes the leveling process a job that takes minutes rather of hours.

 

When setting up cabinets, ez-level was able to determine typical issues that expert contractors and homeowners dealt with. By producing a stylish service, the company had the ability to get rid of issues, turning an uphill struggle into one that takes just a few minutes of effort. The business continues to develop home improvement items that provide ease of use and development.

  • Partner links